THE MANURHIN K’MX 632 is designed for productive machining of parts for bars with a
maximum diameter of 32 mm.
With a spindle bore diameter of 37 mm, no modification of the end of the bar for bar feeder collet
is needed. The
machine comes standard with two electro spindles, each with a maximum speed of 10,000 rpm and with a
rotary guide bush,
synchronized by pulleys and belts from the main spindle. Six linear axes (X1, X2, Y1, Y2, Z1, Z2),
two rotary axes (C1,
C2). The machine is very strong when milling, with torque up to 32Nm!
THE MANURHIN K’MX 632 is designed for productive machining of parts for bars with a
maximum diameter of 32 mm.
With a spindle bore diameter of 37 mm, no modification of the end of the bar for bar feeder
collet
is needed. The
machine comes standard with two electro spindles, each with a maximum speed of 10,000 rpm and
with a
rotary guide bush,
synchronized by pulleys and belts from the main spindle. Six linear axes (X1, X2, Y1, Y2, Z1,
Z2),
two rotary axes (C1,
C2). The machine is very strong when milling, with torque up to 32Nm!
THE MANURHIN K’MX 632 is designed for productive machining of parts for bars with a
maximum diameter of 32 mm.
With a spindle bore diameter of 37 mm, no modification of the end of the bar for bar feeder
collet
is needed. The
machine comes standard with two electro spindles, each with a maximum speed of 10,000 rpm and
with a
rotary guide bush,
synchronized by pulleys and belts from the main spindle. Six linear axes (X1, X2, Y1, Y2, Z1,
Z2),
two rotary axes (C1,
C2). The machine is very strong when milling, with torque up to 32Nm!
THE MANURHIN K’MX 632 is designed for productive machining of parts for bars with a
maximum diameter of 32 mm.
With a spindle bore diameter of 37 mm, no modification of the end of the bar for bar feeder
collet
is needed. The
machine comes standard with two electro spindles, each with a maximum speed of 10,000 rpm and
with a
rotary guide bush,
synchronized by pulleys and belts from the main spindle. Six linear axes (X1, X2, Y1, Y2, Z1,
Z2),
two rotary axes (C1,
C2). The machine is very strong when milling, with torque up to 32Nm!
THE MANURHIN K’MX 632 is designed for productive machining of parts for bars with a
maximum diameter of 32 mm.
With a spindle bore diameter of 37 mm, no modification of the end of the bar for bar feeder
collet
is needed. The
machine comes standard with two electro spindles, each with a maximum speed of 10,000 rpm and
with a
rotary guide bush,
synchronized by pulleys and belts from the main spindle. Six linear axes (X1, X2, Y1, Y2, Z1,
Z2),
two rotary axes (C1,
C2). The machine is very strong when milling, with torque up to 32Nm!
THE MANURHIN K’MX 632 is designed for productive machining of parts for bars with a
maximum diameter of 32 mm.
With a spindle bore diameter of 37 mm, no modification of the end of the bar for bar feeder
collet
is needed. The
machine comes standard with two electro spindles, each with a maximum speed of 10,000 rpm and
with a
rotary guide bush,
synchronized by pulleys and belts from the main spindle. Six linear axes (X1, X2, Y1, Y2, Z1,
Z2),
two rotary axes (C1,
C2). The machine is very strong when milling, with torque up to 32Nm!
THE MANURHIN K’MX 632 is designed for productive machining of parts for bars with a
maximum diameter of 32 mm.
With a spindle bore diameter of 37 mm, no modification of the end of the bar for bar feeder
collet
is needed. The
machine comes standard with two electro spindles, each with a maximum speed of 10,000 rpm and
with a
rotary guide bush,
synchronized by pulleys and belts from the main spindle. Six linear axes (X1, X2, Y1, Y2, Z1,
Z2),
two rotary axes (C1,
C2). The machine is very strong when milling, with torque up to 32Nm!
THE MANURHIN K’MX 632 is designed for productive machining of parts for bars with a
maximum diameter of 32 mm.
With a spindle bore diameter of 37 mm, no modification of the end of the bar for bar feeder
collet
is needed. The
machine comes standard with two electro spindles, each with a maximum speed of 10,000 rpm and
with a
rotary guide bush,
synchronized by pulleys and belts from the main spindle. Six linear axes (X1, X2, Y1, Y2, Z1,
Z2),
two rotary axes (C1,
C2). The machine is very strong when milling, with torque up to 32Nm!
THE MANURHIN K’MX 632 is designed for productive machining of parts for bars with a
maximum diameter of 32 mm.
With a spindle bore diameter of 37 mm, no modification of the end of the bar for bar feeder
collet
is needed. The
machine comes standard with two electro spindles, each with a maximum speed of 10,000 rpm and
with a
rotary guide bush,
synchronized by pulleys and belts from the main spindle. Six linear axes (X1, X2, Y1, Y2, Z1,
Z2),
two rotary axes (C1,
C2). The machine is very strong when milling, with torque up to 32Nm!